The Fuji Mini Mite HVLP series is like the premier product collection in Fuji — the Q Platinum series. They have all the same features except for the sound reduction technology used on the Q series and the speed control knob of the telescope together with Q5. It’s noisy but costs less than the Q series.

The Fuji Mini Mite 4, using its 4 fan turbine can produce 9 PSI of stress for atomization and a superb finish. The pressure is great enough for viscous paint without much thinning.

Each of the sprayer system from Fuji come with a standard 25-foot hose, so the turbine can be put away from your work area. And this is extremely much recommended as the overspray paint may be sucked in by the filter, necessitating regular cleaning.

Did I mentionthey have a superb customer service?

Fuji Mini Mite 4 Characteristics

Impact Type: Gravity / Bottom (Siphon) Impact
Stress Rating: 9 PSI / Bar
Sprayer Sort: HVLP
Air Cap: 1.3mm (supports 0.8, 1.0, 1.3, 1.5, 1.8, 2.0 and 2.5 mm)
Cup Capacity: 600 cc / 21-fl. Ounce
Max Rate: GPH (gallon per hour)
Motor/Pump: 4 phase pump
Min/Max Fan Pattern: 1 — 15 inches in 8 inches space.
Air Filter: Platinum Double Filter #7224-2
Weight: 23.6 pounds (10.7 kg)3 Model of Fuji Mini Mite Platinum Collection

There are 3 versions of the Mini Mite collection of Fuji Sprayer system: the Mini Mite 3 with 3 turbine fans, the Mini Mite 4 with 4 turbine fans and the Mini-Mite 5 with 5 telescope lovers. Each of the models also come in various packages that have distinct gun versions with the toaster system.

What’s Different

Contained with Min Mite 5 is 5-for-5 Bonus Kit: 6′ Whip Hose, Wet Film Gauge, 19 computer Spray Gun Cleaning & Maintenance Kit with Lubricant, Extra Turbine Filter,”Always Quantify” Booklet — Document your substance preparation and results.

What is 3 Stage, 4 Stage5 Stage Motor

The 5 stage motor of the Mini Mite 5 version generates 9.5 PSI for finer atomization and increased finish. The Mini-Mite 4 model produces 9 PSI and Mini Mite 3 produces 6 PSI of pressure. The greater the pressure the more viscous substances can be sprayed with that.

The number”4″ in the title”Fuji Mini Mite 4 Platinum” stands for number of fans the sprayer system telescope motor has. So Min-Mite 3 has three motor enthusiasts and the Min-Mite 5 has five. A platform with more buffs prices more. Aside from the price , what exactly does more fan mean to you?

First off more enthusiasts mean more pressure, as stated earlier. The 3-stage motor spins faster than the 4 stage motor and the 4 stage motor spins faster than 5 stage and so on. Faster rotation means more wear and tear tear which means more breakdowns and more expense for maintenance. Additionally, it means more downtime and potential business loss — loss of revenue.

Stress Rating

More enthusiasts create more stress and the speed at which you paint. The Min-Mite 3 generates 6 PSI, Min-Mite 4 generates 9 PSI and the Min-Mite 5, 9.5 PSI. At greater PSI the paint is atomized nicer for a more professional finish and can spray more viscous materials.

Common Capabilities

Besides the above-mentioned differences, there are several common features of the Mini-Mite series. The”Fuji Mini Mite 4” means it’s the very best product in this kind of paint sprayer system from Fuji.

Image result for Fuji Mini Mite

Noise Reduction Covers (NRC)

The three versions have the Noise Reduction Covers (NRC) that reduces the noise created by the turbine.

Ambient air is entrained just from the rear effectively eliminating any indirect Sound Paths. Air is drawn in through specially made’Finger Slots’ for optimum performance.

Heat Dissipation Chamber

Turbines of this Sprayer System produce a lot of warmth and it builds up in the turbine. Fuji Spray has designed a technique that eliminates the extra heat by directing it into the Heat Dissipation Box located in the rear of the case. Hot air is dissipated evenly through the optimum surface area using 60 holes, there is no extra hiss or loud whistling sound. The result is a cooler operating temperature and a longer life for the system compared to other standard systems.

Every one of the 3 models of the Mini-Mite System support 3 different models of spray guns. The three versions of the spray guns are:

The”G” in the model implies the gun is a gravity gun. Siphon fed T70 has a cup capability of 1 Quart (1000cc) and includes a 1.3mm Air Cap. The T75G is a gravity gun with a power of 0.63 Quart (600cc) and also comes with a 1.3mm Air Cap. And the GXPC includes a capacity of 0.42 Quart (400cc) includes 1.4mm Air Cap.

The T-Model� delivers an enhanced spray pattern for exceptional performance. The new sleek design is ergonomic and well balanced.

The G-XPC, T-Model — T70 along with also the T-Model� — T75G non-bleed Gravity Spray Gun features an exclusive side Pattern Control Knob to adjust the Fan Size. The Fan Pattern is adjustable from 1″ to 15″ from 8″ distances.

Other Capabilities

They come with a 25ft Hi-Flex Hose with Quick-Connect, Air Control Valve, User Manual, Viscosity Cup, Wrench, and Cleaning Brush. The machine runs on both 110-120 V and 220-240 V electricity.

Paint Type Supported

Paint Types: Many kinds of paints are supported such as Nitrocellulose lacquers, dyes, cellulose, acrylics, synthetics, polyurethane, stains, varnish, primers, water-based finishes, oil-based paints, urethanes, enamel, latex and a lot more. Please consult with the Air Cap Set Information to determine which Cap size supports that kind of paint.

Customer Satisfaction

If you Have a Look at the average evaluation of this product, you will Know that the customers who used the item were quite happy with it. Most of the people loved the minimum overspray that they experienced when they went for latex. The results were so great and this product turned out to be a massive time saver for them. The end obtained was perfect. The instrument proved to be quite advantageous for the DIYers who have been searching for a professional finish in their job.

The hosepipe that comes with the system is elastic but a bit stiff When you’re going to be doing any interior cottage work. The Fuji 2049F 6-Foot flexible whip hose is the solution. The Whip hose is quite lightweight and flexible. It can twist and bend any sharp and difficult corner, producing your gun far more pliable.

It’s created from glass fiber-reinforced polymer. This lightweight Material requires the weight off your wrist letting effortless maneuverability of this of the spray gun.

This extra length of 6 ft along with the provided 25 feet Allows for additional cooling of the air as it travels a longer distance from the turbine. This frequently alleviates problems with rapid drying lacquers (and Latex House Paint) drying too quickly.

This particular whip hose can also be compatible with other HVLP sprayer programs from some other brands.